Manual Wheelchairs - Solution Based - Solution Based

Includes: 2 x Arm Rest Clip (Part 27) 4 x Cushion Connector (Part 28) 2 x Tube Cap (32mm) (Part 28) 2 x Commode Bucket Connectors (Part 31)

Part # 58, Part Description Seat Base, Part fits model SB2 only

Includes: 2 x Arm Rest Clip (Part 27)
4 x Cushion Connector (Part 28)
2 x Tube Cap (32mm) (Part 29)
4 x Track Wheel + 4 x Axle (Part13 + 15)
2 x Primary Brake Stopper (Part 59)

Seat Base (SB2T) Description Includes: 2 x Arm Rest Clip (Part 27) 4 x Cushion Connector (Part 28) 2 x Tube Cap (32mm) (Part 29) 4 x Track Wheel (Part 13) 4 x Track Wheel Axle (Part 15) 2 x Primary Brake Stopper (Part 59) 1 x Strut (Left) (Part 78) 1 x Strut (Right) (Part 79) 2 x Rubber Stopper (Part 80) 2 x Tilt Stopper (Part 81) 2 x Primary Brake Stopper (Part 59)

Includes: 2 x Aluminium Rivets For Use With: SB1, SB2, and SB2T

Includes: 2 x Aluminium Rivets For Use With: SB1, SB2, and SB2T

Pack of 4 Shower Discs Shower discs may be required where the shower track base (part 47) suction cups do not achieve sufficient suction to the floor. If the floor is tiled, the grout lines may prevent suction cups from holding. Use these discs by adhering to the shower floor then place the suction cups onto these discs for better grip. Check with adhesive manufacturers to decided the best adhesive for your situation. For Use With: SB1

This track is the shower base for the SB1.

Includes: 1 x Secondary Brake (Left) (Part 5) 1 x Secondary Brake (Right) (Part 6) 1 x Primary Brake Latch (Part 7) 2 x Latch Hook (Part 8) 4 x Leg Tube Cap (Part 12) For Use With: SB1

Fits into part 47 - Longer adjustment tubes may be required for shower bases that are level or below the bathroom floor, refer to Accessories / SBR For Use With: SB1

To be used with only on SB6c and SB6w Chairs

For Use With: SB2 and SB2T.