Parts

• Take your Buzzaround power scooter with you everywhere. With the Buzz Extreme Charging Deck, you can easily

• Park your Golden Buzzaround mobility scooter at the door, garage, back porch, etc.
• Charge the batteries inside your home
• Works with old Battery Boxes that don't have plugs at the back 

New Buzzaround EX and LX Y Cable Charging Cord for GB118, GB119, GB148 and GB149

• Works for new battery boxes EX and LX
• Allows you to charge your mobility scooter batteries with out taking the Scooter inside
• Light weight and easy to use
• Works if you have the new battery boxes. 

Golden Lift Chair  Two-Button Remote 

• 2 -Button Hand Control 
• USB Charging Port 
• Works with one motor lift chairs 
• 5- prong connection 
• Check the Specification page for model compatibility.

• Safety horn also functions as an audible diagnostic tool
• Horn sounds when there are problems with the control module
• Instructions may be found in the owners' manual
• The horn & diagnostic beeper for the Golden Buzzaround CarryOn (GB120) scooter does more than simply announce your presence to others
• This horn signal malfunctions in the electronics

• The scooter's "fuel gauge
• Necessary for knowing your batteries' condition
• Part of the console assembly
• The LED battery meter for the Golden Buzzaround CarryOn (GB120) scooter is also referred to as the voltmeter
• This is the circular gauge that rests in the middle of the tiller's console and is necessary for knowing your batteries' condition

Golden Technologies Dynamic Linx Joystick Cable 

Dynamic Linx Cable 1.5M/59IN

Works on Envy GB162 or GP605 

Part # MBC-605L-CNT-CAB

Golden Technology Envy GP-162 Connector Assembly Female 

• Sold as Each ( Right (m2)  or Left  (M1) 
• Length - 16" 
• 4-prong wire harness with Springs 
• Works with GB162 Dynamic Linx Joystick 
• This is compatible with GP162 ONLY 

Male Motor Connector Assembly for Golden Envy GP162 & PTC Gp160

• Male motor assemble connector for Envy PWC Model GP162 & PTC GP160
• The harness connects the motor to the controller for power 
• Will need to be replaced if cracked or broken
• make sure all connections are pushed in before replacing