Golden Two Button Hand Remote

This is a 2-button hand control (remote) for Golden Technologies single-motor lift chairs, often called the "Comfort Zone One Position" or basic 2-button remote. It controls Lift and Recline functions on 3-position (or 1-motor) lift chairs.

Key Specifications:

• 2-Button Hand Control (typically one for Up/Lift, one for Down/Recline)
• USB charging port on the remote
• 5-prong connection
• Designed for Golden single-motor / 3-position lift chairs

Compatible Golden Lift Chair Models

• Comforter Series: PR501, PR501 Wide
• Signature Series: Burlington (PR722), Imperial (PR404), Regal (PR751), Royal (PR752), Space Saver (PR906), Transfer Lift (PR451), Winston (PR410)
• Space Saver: PR-931
• Traditional Series: Cambridge (PR401), Pioneer (PR643), Williamsburg (PR747)
• Value Series: Capri (PR200), Monarch (PR355)

Troubleshooting Tips (Very Useful):

Your note at the end is excellent advice:

1. Locate the motor (usually under the chair).
2. Unplug the hand control cord from the lead wire and plug the remote directly into the motor.
3. Test the buttons.
   • If the chair works → The lead wire cord (extension between remote and motor) is faulty and needs replacement.
   • If it still doesn’t work → The remote itself or the motor may be the issue.

Common Issues:

• Worn or broken 5-prong connector
• Damaged lead wire (very common)
• Weak batteries or USB charging problems on newer remotes
• Motor failure (less common)

Note: This remote will not work on:

• MaxiComfort / Zero Gravity models (e.g., PR505, PR510, PR535, etc.)
• 2-motor, 4-zone, or 5-zone Comfort Zone chairs
• Models with power headrest, lumbar, or tilt functions