Transport & Transfer Aids

TubBuddy Transfer System with Tilt

SB Bath Transfer System for bathtubs 

  • 350 LB Weight Capacity 
  • Adjustable Tilt angle from 0-30 degrees 
  • Rolls over most standard toilets 
  • Removable/ Lockable/ flip-back arms 
  • Seat Height Adjustable
  • Commode System
  • Stainless and Aluminum materials with (Grade of 6061 T6 and 304)

SB2T Tub Transfer System significantly reduces costs compared to completely redoing your bathtub to a walk-in shower. 

In stock
SKU
SB2T
Special Price $3,395.00 Regular Price $4,295.00
 

The TubBuddy with Tilt transfer system will turn your existing bath tub into an accessible bathroom that allows you to enjoy showering again without the excessive cost, delay and stress of a full bathroom remodel.

The TubBuddy with Tilt alleviates heavy lifting and multiple transfers for toiling and showering.This chair is separated into three sections; rolling base (shower chair), bridge and tub base.The rolling base rolls around the house like a wheelchair allowing patient to easily transfer and then roll right over most toilets.Once completed with toiling the rolling base connects to a bridge and then onto the tub base allowing the chair to slide in a tilt position over the tub. Once over the tub the bridge disconnects allowing the curtain to close .

  • The TubBuddy with Tilt allows the chair to tilt while transferring over the tub preventing the caregiver lifting the patients legs over the tub.
  • The system is made of aluminum which will not rust when in contact with water.
  • Height adjustability on rolling base and tub base- allow for use in a variety of tubs.
  • Rolls over some toilets- allowing for "no mess"alternative to commode usage.
  • Custom bridge sizes are available- allowing for use in a variety of bathroom sizes.
PRODUCT FEATURES
Tilt Angle
0 30 Degrees, Infinite Positioning
Armrests
Removable / Lockable / Flip-back
Height
Height Adjustable
Frame Material
Corrosion resistant Aluminum frame (Grade 6061 T6)
Misc. Parts
Stainless steel parts and hardware (Grade 304)
Safety Belts
Lap & Chest Belts
Caster Wheels
5"(125mm) , Lockable
Commode
Removable Commode system

Shower Buddy SB2T Tub Buddy with Dimensions


Write Your Own Review
You're reviewing:TubBuddy Transfer System with Tilt
Your Rating

SB2T TubBuddy Plus Tilt Dimensions: 

Rolling Base Specs 19.3" W X 33" D 
Rolling Base with Footrest 19.3" x 43.3" D 
Back Width 18" 
Back Rest Height 17" 
Max Toilet Height Clearance 19.4" 
Bridge Length ( Standard ) 11.8" Custom Lengths available) 
Inside Arm-to-Arm Width 18.7" 
Outside Arm-to-Arm Width 22.5" 
Seat Dimensions 17.7" W X 16.5" D 
seat Height from the floor 24.8" - 28.8" ( Adjustable) 
Tub Base ( At Top) 13" W x 19"D 
Tub Base ( At Bottom) 30' W x 16.7" D ( Adjustable To 28.3 "
Commode Seat Opening 6.8" W x 13" L 
Tilt Angle 0-30 Degrees infinite positioning 
Length When Fully Tilted 54"
Loading...
Back to Top